Category: Uncategorized

What Is A Short Circuit?

By Springdale Electrician,

Mister Sparky Electrician NWA shows you how to fix an electrical short circuit

Your Complete Guide To Short Circuits

Any and every electrical problem that occurs in a home setting is always blamed on a short circuit. But what does that mean exactly, and how do you find it, and how can you fix it in your home?

What is a short circuit?

Short circuits are shortcut paths. Electrical circuits are set up to follow specific paths through which electricity should flow. Short-circuiting occurs when a shorter, alternative path presents itself, thereby having the electricity flow in a route that was not previously established. The excessive flow of current in the new path causes electrical appliances to stop working.

Electrical currents tend to take the path of least resistance. For example, suppose you insert a metal object in a socket. In that case, you are providing the electrical currents with a shorter, alternative route to travel, and it will almost always take it.

When this happens, the socket will stop functioning as expected since the currents did not finish the expected route. By following the new path, the electrical currents seek to be discharged through a person or an item that presents the danger that might come with electrical circuits.

Short circuits occur in two types. These are:

Short circuits

Short circuits occur when a hot wire comes into contact with a neutral wire. This causes resistance to lessen dramatically, and an influx of current flows through the newly established path. This has more chances of causing accidents. Electricians find this to be the most common short circuit.

Ground fault short circuits

Ground faults occur when a hot wire comes into contact with a grounded part of the electrical system, for example, a grounded metal box or bare copper wire. When this occurs, the electrical currents choose the path of least resistance and flow through the newly established path. These types of short circuits have minimal chances of causing accidents.

a photo of an electrical outletHow to find a short circuit?

The task of finding or detecting short circuits is something that you should have a professional carry out. However, some of the things that might alert you to the occurrence of short-circuiting are:

Faulty wire insulation

Insulation allows wires to stay in place without touching. Poorly insulated wires can be as a result of old wires whose insulation has deteriorated, punctured by screws or nails, or have been chewed on by rodents. When the wires are open, it provides an avenue where the hot wires can quickly contact the neutral wires, causing short-circuiting.

Loose wire connections

If wires become loosely attached, this can create a scenario where the hot wires can contact the loose wires. This might act as a hazard, so it is always essential to have a professional electrician look at it.

Faulty appliance wiring

When you plug in a device into the socket and blows, a wiring problem in the appliance causes the short circuits.

Therefore, any defect brings about short-circuiting either in the appliance itself, the plugs, or the power cords. When this happens, it is always important to contact a professional to fix your appliances and prevent other short circuits.

In essence, you can be able to find the area at which short-circuiting occurred by:

•Checking for faulty wire insulations

•Check for loose wire connections

•Checking for appliances that might have faulty wiring, especially if they blow when connected to power sources.

These usually act as useful pointers on finding short circuits, but it is always essential to consult a professional electrician.

a photo of a circuit breaker on the wallHow to fix the problem?

Once you suspect that you might be experiencing short-circuiting in your home, it is essential to try and find the short circuit’s exact location before even attempting to fix it. To do this, we make use of a circuit breaker.

Circuit breakers are designed to cut off electrical current flow if the voltage exceeds a given level. That said, a circuit breaker can trip if there is a power overload.

However, if you notice that your circuit breaker keeps on constantly tripping after every reset, that might indicate that there is something wrong on that circuit path.

During installation, multiple circuit breakers are assigned for specific rooms of the home sections in your service panel.

To help you find out where the short-circuiting is happening:

•Identify the circuit breaker that has tripped to the off position. This will alert you that short-circuiting might have occurred in that given part of the house. Leave the circuit breaker in the OFF position.

•Check the appliances in those rooms. If you discover that their power plugs have been damaged, remove them from the sockets. Once you do this, switch on the circuit breaker. If it does not go off again, it means the short-circuiting cause was the affected appliance. However, if it does go off again, the issue did not originate from the appliances.

•Check the lights and appliance switches in these rooms. With the circuit breaker still on, switch on and off each light and appliance switch. If any of these cause the circuit breaker to trip to the off position, that might cause the short circuits.

Once you have located the area that the short-circuiting is occurring, it is advisable to get a professional electrician to advise you on fixing short circuits. This ensures that you do not engage in anything that might harm you or your family members. Electrical faults are the main causes of fires in homes and industries, and they are all due to short circuits.

Mister Sparky Electrician Springdale, America’s On-Time Electrician in Bella Vista, Bentonville, Rogers, Springdale and Fayetteville services the Northwest Arkansas area with a team of licensed electricians. In addition to flickering lights, some of the electrician services provided by the company include electrical outlet/switch repair, ceiling fan installation, lighting installation, electrical wiring repair, landscape lighting installation and home electrical inspections.

  Category: Uncategorized
  Comments: Comments Off on What Is A Short Circuit?

Why Are My Lights Flickering?

By Springdale Electrician,

Mister Sparky Electrician NWA shows you how to stop lights flickering

Why Do My Lights Keep Flickering?

Besides Christmas tree lights and faux flame bulbs, the site of flickering lights in your home can be very frustrating. However, no need to worry because the issue may be more straightforward than you may think. Usually, the flickering pattern of your lights can help you diagnose the underlying issue.

When investigating the problem, look out for patterns such as when the flickering happens, the typical duration, and frequency of occurrence. It is always prudent to do some personal investigation and try a few simple fixes before consulting an electrician. Here are some common reasons behind flickering lights and their possible fixes.

One Light Flickering

If your light flickering problem is isolated to one bulb only, perhaps it could be because it is due for replacement or loose in the socket. This is arguably the simplest problem to solve and should be no cause for alarm.

Lights Flickering in One Room

Having multiple flickering lights within a contained area can be quite worrying. In most cases, the probable cause for this issue is a problem with your home’s circuitry. Since circuit issues can be dangerous if left unchecked, it is best to act on this issue by calling an electrician for further diagnosis quickly.

Mister Sparky Electrician NWA fixes flickering lights

Lights Flickering When Powering on a Large Appliance

A large home appliance, e.g., a refrigerator, washing machine, or oven, can add a significant load to your home’s central circuit breaker. That said, having several large home appliances and using them simultaneously can strain your home’s main circuit breaker.

Adding an unbearable load to your home’s main circuit breaker can cause several lights to flicker throughout your house. This problem is usually too technical to handle for most people and may require an inspection from a competent electrician to determine whether an electrical service upgrade is necessary.

Lights Flickering throughout the House

If the flickering is not limited to a contained area in your home and is not triggered by large home appliances, it may signal a larger problem. The most probable causes for such flickering are electrical service issues, e.g., loose service conductors in the central electrical panel. These electrical service issues could cause much bigger problems than flickering lights, e.g., fires, requiring immediate evaluation by a competent electrician.

Simple Fixes

As mentioned earlier, it is always a good idea to evaluate the flickering in your home and try some simple fixes before calling an electrician for help. Here are some simple fixes you can try for the less complicated electrical issues.

Tighten Loose Bulbs

As apparent as this solution is, it may sometimes not be the first idea that comes to mind. If you have a few flickering lightbulbs, turn them off and put on some gloves to protect your skin from excessive heat, then screw them into their sockets tightly. Since loose lightbulbs do not make enough contact with their sockets, they tend to flicker randomly.

Switch to Smart BulbsMister Sparky Electrician NWA shows you how to fix lights flickering

Smart bulbs not only help improve the quality of your home’s lighting but also help you get rid of old dimmers. If only one light is flickering, and you are sure it is not due to a loose connection, replacing it should help.

The type of bulbs you use could affect the flickering in your house. For instance, fluorescent bulbs tend to flicker in cold temperatures or when powering up. LED bulbs, on the other hand, tend to flicker when paired with dimmer switches. This is because dimmers are designed for high electrical loads, making them incompatible with low-voltage LED bulbs.

You can avoid flickering by ensuring your dimmable bulbs are compatible with their respective switches. However, if flickering persists while using dimmer switches, it is best to upgrade to smart bulbs that do not require physical dimmer switches. Dimming via a smart bulb is arguably more reliable, not to mention its potential to solve the dimming problems associated with old wiring or old dimmer switches.

Change Incompatible or Old Switches

If you have ruled out the bulb as the cause for the flickering, proceed to evaluate the wall switches. Modern bulbs such as LEDs and incandescent bulbs connected to an old dimmer switch may flicker because they are incompatible. Also, loose wiring behind the wall switch could cause flickering.

To avoid mismatches, check the dimmers and the bulbs’ ratings to ensure they are compatible. If you decide to install a new dimmer, turn off the circuit breaker’s power before handling any wiring.

Complex Fixes

If your lighting issues persist after these simple fixes, then the underlying cause probably affects your entire house. Such problems have the potential to damage your electrical appliances and expose your house to the possibility of an electrical fire. Therefore, never hesitate to consult a competent electrician.

Check for Loose Wiring

If your home’s wiring is old or performed poorly, your lights may begin to flicker, buzz, or both. Loose wiring is among the most common causes of electrical fires in homes and is, therefore, something you should take seriously.

If you have tried different ways of solving your flickering issue with no success and suspect the underlying cause is loose wiring, call a competent electrician immediately for further evaluation. A good electrician should evaluate multiple potential causes and diagnose your lighting issue accurately.

Check the Current

Like loose wiring, overloaded circuits are a huge risk to your house’s electrical system. HVAC units and other large home appliances demand a lot of power to run and could make your lights flicker by drawing too much current from your circuit.

The common culprits behind this problem are weak circuit breakers and inadequate wiring to large appliances. To pinpoint the appliances that draw too much current, power each load one at a time and listen for buzzing at your circuit breaker. If you cannot replace your circuit breaker, contact an electrician to advise you on the best one to purchase and have them install it for you.

Mister Sparky Electrician Springdale, America’s On-Time Electrician in Bella Vista, Bentonville, Rogers, Springdale and Fayetteville services the Northwest Arkansas area with a team of licensed electricians. In addition to flickering lights, some of the electrician services provided by the company include electrical outlet/switch repair, ceiling fan installation, lighting installation, electrical wiring repair, landscape lighting installation and home electrical inspections.

  Category: Uncategorized
  Comments: Comments Off on Why Are My Lights Flickering?

Energy Efficiency Tips For the Summer

By Springdale Electrician,

Mister Sparky Electrician NWA ceiling fan

How to be Energy Efficient in the Summer

With summer in full swing, the hot weather isn’t holding back. While there are a few people lucky enough to live in colder locations, many homeowners deal with this long patch of this blistering heat for months. To help keep houses cooler and more comfortable, people rely on AC units, fans, and other equipment to drive up energy costs. Even though some people are more than willing to suffer these increased costs to avoid sleepless nights and sweaty days, they aren’t inevitable. Here, we’ll look at some energy efficiency tips that can help you stay cool without spending a fortune.

Perfect Your Thermostat Settings

Perhaps the easiest of energy efficiency tips involves optimizing your thermostat settings. The Department of Energy advises homeowners to set their thermostat to 78 degrees during the summer to save around 10% in utility costs every year. Even if 78 degrees is too hot, you’ll still see some savings by raising your thermostat’s temperature a little. You can save around 3% of cooling costs for every degree you go higher than 72 degrees.

Invest in a Programmable Thermostat

It seems ironic that investing in something can save you money, but that’s the case with a programmable thermostat. These capable devices are certainly more expensive than more traditional models. However, the money saved in the long run will make up for the higher price tag. These devices can be programmed to reach a higher temperature when you’re gone and return to a comfortable setting when you arrive. Homeowners can easily control some models from a laptop, tablet, or smartphone.Mister Sparky Electrician NWA thermosstat

Buy an Updated Air Conditioner

As you might have assumed, some of the most impactful energy efficiency tips require an investment. If you’re interested in reducing your monthly utility bills, it might be time for an upgrade. Cooling and heating account for roughly half of the energy used in a typical home, so any changes made in this area will have a drastic impact on what you pay. When shopping around for a new AC unit, keep an eye out for systems with EER and SEER ratings. These models are significantly more effective than the average unit. If your budget permits, you might as well go green on all of your household appliances. These can also work towards reducing your monthly energy bills.

Reduce Water Use

Not all energy efficiency tips are directly related to staying cool. If you think outside the box, you can find a ton of areas that could use some adjustment. For example, the average household uses more water during the summer months for a variety of reasons. Your lawn and plants require more hydration; you’re thirstier, take more shower or baths, and more. Reducing how much water you use can help keep this chunk of your utility bills lower. If you find it difficult to control how much water you use, you can install low-flow fixtures that restrict how much water comes out.

Use LED Bulbs

Light-emitting diodes(LEDs) are a type of lighting that converts electricity into light. Qualified LEDs only use 20%-25% of the energy and will last up to 15-25 times longer than regular incandescent bulbs. There are many different size bulbs and they can be used for different fixtures, such as desk lamps, kitchen lighting, and outdoor area lights. LED light bulbs might be more expensive, however, they will save you money in the long run as they last a long time and use little amounts of energy compared to incandescent bulbs.

Don’t Use Hot Water

Resisting the urge to use hot water is one of the easiest energy efficiency tips to implement in the summer. With the weather being hot, it’s more bearable to shower or bath using cold or lukewarm water. When it comes to washing clothes, only use hot water when necessary. You’ll see the savings add up rather quickly.

Block Out Sunlight

The sun isn’t just making it hotter outside, and it’s also directly warming your home. Windows intensify this heat to create a sauna-like atmosphere inside. Closing blinds, curtains, shutters, and other covers to block out sunlight throughout the day can work wonders for cooling down your home. Add this to your list of free and simple energy efficiency tips.

Use Fans

Some people wrongly assume that using fans will only increase their energy bills. Ironically, using ceiling fans, box fans, and standing fans can significantly reduce your monthly costs. When using enough fans, homeowners can quickly turn up their thermostat temperature by a few degrees without sacrificing their comfort level. Be sure to switch off your fans when leaving the room. You wouldn’t want to end up offsetting these advantages.

Optimize Your Fridge Settings

While turning off your fridge and freezer would undoubtedly save you a lot of money in energy costs throughout the summer, it’s not a feasible option. However, that doesn’t mean you have to take the high electric bills as they come. It’s all about optimizing the functioning of these appliances to reduce the energy used. Stocking your fridge full increases its efficiency since there is less space to cool. Be sure always to check that the door seal is intact.

Take a Break From the Devices

It turns out that your devices aren’t just eating up your time and attention. They’re also taking a chunk out of your wallet each month. Not only does it take a lot of electricity to charge your laptops, tablets, phones, and other devices daily, but they also emit a significant amount of heat. This heat can increase the temperature in your home, making it harder and more expensive to cool down.Mister Sparky Electrician NWA wall outlet

Ventilate When Cooking

Cooking is another major source of heat in your home. Whether you’re baking a cake, frying some pancakes, or cooking some steak, the heat emitted increases the temperature in your house. Cooking causes your AC unit, fans, and other cooling equipment to work overtime. Unless you want to dine out or cook outside, you’ll need to increase your kitchen’s ventilation. Opening windows, cracking doors, and turning on overhead ventilation can help reduce your energy costs.

While the average homeowner can implement some of these energy efficiency tips, it’s always good to work with a professional electrician. The professionals from Mister Sparky can assess your home’s energy efficiency, conduct routine inspections, fix issues, and even install new equipment.

Mister Sparky Electrician Springdale, America’s On-Time Electrician in Bella Vista, Bentonville, Rogers, Springdale and Fayetteville services the Northwest Arkansas area with a team of licensed electricians. In addition to flickering lights, some of the electrician services provided by the company include electrical outlet/switch repair, ceiling fan installation, lighting installation, electrical wiring repair, landscape lighting installation and home electrical inspections.

  Category: Uncategorized
  Comments: Comments Off on Energy Efficiency Tips For the Summer

What Are The Types Of Electrical Wiring?

By Springdale Electrician,

A photo of mister sparky electrician nwa with the types of electrical wiring.

Types Of Electrical Wiring

The general concept of electrical wiring encompasses putting up wires and lighting systems. Wiring is a technical installation that requires qualified electricians to handle. Different governments and professional bodies have come up with safety measures. These standards guide electrical installation in their regions. The rules guide and apply to all types of electrical wiring.

Cleat WiringMister Sparky Electrician NWA shows you the types of electrical wiring.

Cleat wiring is one of the old wiring systems that have ceased to be in use. Cleats are supporting objects with insulation- they hold wires on the wall for support. The cables remain exposed to the outside.
The cleats could be objects made of poor conductors of electricity like wood. Wires on their part may have insulation sheaths too. Sometimes, other protective materials shield them against adverse weather.
Most electricians would not install this type of electrical for their domestic clients. Notably, not when installing permanent wiring systems. Cleat wiring is for functions like home parties. In some cases, the system works for camping expeditions and other temporary purposes.

Pros and Cons of Cleat Wiring

All types of electrical wiring systems have their advantages and disadvantages. The good or bad sides depend on the reason, place of installation, among other issues.

The Pros

• Since the system leaves the cables outside, it is easy to notice and repair any faults.
• It is the best system to use in events that last only a few days and nights.
• The cleat wiring system is modest and saves on costs.
• It is easy to extend the wiring, and even to uninstall once its purpose is over.

The Cons

• It is not suitable for permanent installations due to the loose-fitting.
• The system is a safety hazard. It poses an electrocution risk.
• The wires are not immune from fast wearing out dues to their exposure to harsh weather.
• The installation has no authentic value. At times, it is just ugly, sagging wires.

Batten Wiring

Batten is another one of the simple types of electrical wiring. Like Cleat wiring, it suits low-key installations better. Here is what the process of installation requires:
• A straight wooden batten around 10 millimeters thickness
• Cables (Copper tape Shielded Power cables) or the RTS type
• Brass pins
• •Buckle clips
Installation involves clipping several cables together on the wooden batten. Clipping uses the buckle clips. The work of the brass pins is to fix the buckle clips on the batten.

Pros of Batten Wiring

• It is one of the cheapest types of electrical wiring. The materials used are less costly
• The process of installation is easy to follow
• Batten wiring is self-proofing from harsh weather conditions
• It is more durable than cleat wiring
• The process of repairing any faults is not complicated
• The installation looks better than cleat wiring

Cons of Batten Wiring

• Installing it outside is risky due to environmental effects. Such effects could make it ineffective
• The materials used in its installation cannot hold heavy cables
• It is more likely to suffer destruction from fire or smoke
• It is only suitable for any voltage that is less than 250

Conduit Wiring

Conduit wiring is among the more protective types of electrical wiring. The installation of cables in this system aims at protecting them from humidity. Conduits can be metallic or non-metallic.

Metallic Conduits

They include:
• Rigid Metal Conduit (RMC)
• Electric Metallic Tubing (EMT)
• Intermediate Metal Conduit (IMC)
• Flexible Metal Conduit (FMC)

Non-Metallic Conduits

• Rigid Nonmetallic Conduit (RNC)
• Electric Non-metallic Tubing (ENT)
Of all the types of electric wiring, Conduits have the best protection against all destructive factors. Conduits can keep off any fires from the cables. Chances of an accidental electrocution can be negligible with tubes.
However, the installation of conduits is very costly due to the nature of piping. Besides, the installation process is complicated; it is better to leave it for professional electricians. The system is generally safe. Yet improper earthing can expose humans to dangerous electrocution.

Concealed WiringA photo of concealed wiring from electrician nwa.

Concealed and Conduit are almost similar types of electrical wiring. However, concealed wiring requires passing the pipes inside the walls. Constructors leave spaces for plastic electric pipes inside the walls. Sheathed polyvinyl chloride cables pass through the pipes.
The conduit has openings from where cables connect to the rest of the system. Concealed types of electrical wiring systems are trendy among households.

Requirements for Concealed Wiring

• Plastic pipes
• Cables Sheathed Polyvinyl chloride
• Screws
• Distribution Board box
• Elbows
• Locknut
The process of installing concealed wiring is also technical. Such electric wiring systems require attention to detail that only comes with professional installers.

Pros and Cons of Concealed Wiring

The pros

• Wires are inside the walls and do not affect the aesthetic factor
• The risk of shock from the wiring is zero to none. This factor is actually for all other types of electrical wiring systems
• Concealed wiring is a durable system; wear and tear process is slow
• The insulation is also safe from external damage
• Installation of concealed cables usually comes at the construction stage. One needs not to worry about it after that
• There is minimal exposure to environmental humidity that can be destructive to the wires

The Cons

• The installation process is technical, even though it comes at construction
• There are limited modification options for the system. The initial installation remain unchanged
• Installation leaves considerable damage to your account. The technical and material investment is quite expensive
• You may not notice in case there is any problem with the cables inside the concealment
• Repairing process is as technically demanding as the installation

Electrical installations in homes are sensitive. Electricians follow many safety and professional standards during installation. In some cases, homeowners attempt to complete the process by themselves on a DIY basis.
While this may work in small repairs, it is not advisable. More so when it comes to major electrical installations. Professional electricians can install all types of electrical wiring. They do so with a better observation of safety regulations than you can do on your own. Hire credible electricians from Mister Sparky and breathe easy as they do it for you.

Mister Sparky Electrician Springdale, America’s On-Time Electrician in Bella Vista, Bentonville, Rogers, Springdale and Fayetteville services the Northwest Arkansas area with a team of licensed electricians. In addition to flickering lights, some of the electrician services provided by the company include electrical outlet/switch repair, ceiling fan installation, lighting installation, electrical wiring repair, landscape lighting installation and home electrical inspections.

  Category: Uncategorized
  Comments: Comments Off on What Are The Types Of Electrical Wiring?

Complete Guide: Electrical Outlet Types

By Springdale Electrician,

A photo of Mister Sparky Electrician NWA teaching us about electrical outlet types.

Electrical Outlet Types

Don’t Let Your Electrical Outlets Be A Headache.A photo of one of the electrical outlet types.

If your home is of an age where there are problematic electrical outlets, then it’s time to investigate the different electrical outlets available before you have any replacement.

The electrical outlet types typically found are the “two-pronged” outlet if you have an older property. These are outdated and could be a danger since they do not have the third or “ground” hole, and don’t have the necessary grounding connection within the home’s electrical system. The problem with these electrical outlet types is most household appliance plugs have three prongs, not two, so what is the solution?

You could get an adapter plug that will fit into the two-pronged outlet and allow you to connect a three-pronged appliance, but it will not give you any level of protection from electrical shocks. A ground wire is essential to keep you safe.

If your home has outdated or faulty outlets, and you are considering upgrading them because you are having problems, what electrical outlet types can you install?

The most common electrical outlet types available are:

120-volt – 15 amp outlets.
These are the most commonly used outlets for a residential setting. They are easy to spot, having two identical outlets, with three-pronged holes. They can come in various colors to match a home’s decor and rated for 15 amps. You will find them in bedrooms, living rooms, dens, and dining rooms. Usually, the two vertical slots are at the top on the outlet, with the third one, the arch-like grounding hole at the bottom.

Occasionally, you will see the outlet in the reverse position, with the two vertical slots at the bottom. This is one way to signify that this outlet is controlled by a wall switch, and not live all the time as with the regular outlet. Most times, they are used for lamps that need to be switched on upon entering a room.

240-volt outlets.
These are not like any standard electrical outlet type but are meant for a specific use, such as heavy-duty power tools, clothes dryers, and cooking ranges. They are designed to be a single outlet with a dedicated circuit in the home’s breaker panel. Because of their increased power load, they have a much larger amperage, 30amp, or 40 amp breakers are installed to handle the load.

When comparing a 240-volt outlet to a 120-volt outlet, the first visible difference is the shape. A 240-volt outlet is more significant, generally round, and has three or four holes depending on the age.

The design of the outlet means that the appliance plug must match exactly, avoiding the risk of plugging an inappropriate appliance, and causing injury or worse, causing a fire. In recent years all 240-volt outlets have changed from the three-pronged type to a four-pronged outlet. The additional prong gives a ground wire providing extra safety against electric shocks.

Having your appliances rewired to accommodate four wired plugs should solve any problems. Rewiring work like this should be done by a qualified electrician to ensure the correct installation.

20 amp outlets.
Most electrical outlet types found in the home are rated at 15 amps, but some appliances need more power, which is where the 20 amp outlets and circuits come in handy. With 20 amp outlets that support 25 percent more load, they can deliver the much-needed power supply without tripping circuit breakers.

These outlets are usually found in garages, laundry rooms, and kitchens where most of the power-hungry appliances are located. To recognize a 20 amp outlet, look for a small notch added to the left-hand side prong.

If there is a need to replace a standard 15 amp outlet with a 20 amp outlet, it cannot be a simple exchange because 20 amp circuits require wire that is thicker than 15 amp circuits allowing it to carry more current.

GFCI outlets.
GFCI (ground fault circuit interrupter) outlets can be found anywhere in a home where there is a chance of water being present. The bathroom and the kitchen are the two most likely places to find these electrical outlet types. They are designed to instantly shut off the power to the outlet if a short circuit or ground fault is detected.

For example, a faulty hairdryer is being used in the bathroom, and there is water on the floor. A short circuit in the hairdryer could result in the current passing through the body to the wet floor electrocute the person using the dryer. The GFCI outlet will shut off the power before any current can leave the hairdryer.

Switched outlets.
Ever wanted an outlet where the power can be turned on and off, instead of at the appliance?

With a switched outlet, which has one outlet and a switch, it is possible. An appliance can be plugged in permanently, but with the switch’s flick, it can be turned on or off at any time.Mister Sparky Electrician NWA shows you one of the electrical outlet types.

USB outlets.
Mobile devices need charging all the time, so rather than plugging a USB adapter into an outlet, USB outlets combine the best of both worlds. The best choice is one with two regular outlets, but also has a couple of USB ports built-in for charging any mobile device.

AFCI outlets.
An AFCI outlet looks the same as a GFCI outlet, but it is an arc fault circuit interrupter. Arcs can occur when the electricity jumps across two wires, potentially causing a fire. Older houses can have AFCI outlets installed at the first outlet on every circuit, protecting all outlets on the same circuit.

Smart outlets.
These electrical outlet types are just like regular outlets but can be controlled by a smartphone.

An appliance, such as a lamp, can be turned on or off from anywhere using a smartphone, but they do require some Smarthome hub, to allow communication between the outlet and the phone.

As with any electrical work, upgrading electrical outlets and or circuitry should only be done by a licensed professional. Give Mr. Sparky a call for a free estimate for any electrical work needed.

Mister Sparky Electrician Springdale, America’s On-Time Electrician in Bella Vista, Bentonville, Rogers, Springdale and Fayetteville services the Northwest Arkansas area with a team of licensed electricians. In addition to flickering lights, some of the electrician services provided by the company include electrical outlet/switch repair, ceiling fan installation, lighting installation, electrical wiring repair, landscape lighting installation and home electrical inspections.

  Category: Uncategorized
  Comments: Comments Off on Complete Guide: Electrical Outlet Types