Category: Uncategorized


Space Heater: Give them space!

By Springdale Electrician,

Space heaters are a nice thing to have during the winter time.

Why you should give space heaters space!

Space heaters can make a poorly heated area cozy and comfortable without high whole home heating costs. They can bolster or replace ineffective whole home heating sources and make the coldest of days nice and toasty indoors. Making the choice to consolidate heating to the most used areas of a home with a space heater instead of centralized heat can reduce Winter heating costs considerably. Space heaters come in a range of heat outputs, heating element types, sizes, and costs. Some are ideal for heating a small area, others can easily heat an entire room. They can be a reasonable and effective choice when viewed and treated with proper respect.

Space heaters can potentially be a fire safety risk when not taken care of with safety in mind. The general rule of thumb is to keep self-contained personal heating units 36 inches or further from other objects or people. This is to prevent nearby objects from getting too hot and catching on fire and to prevent anyone from being burned. It is also wise to ensure that the surface the heater is situated on is not highly flammable. There are several kinds of space heaters, which can vary in the type of fuel used to produce heat, general heat output, the potential for danger, and a type of built-in safety features.

Affordable Option

Gas, oil, or kerosene-fueled space heaters can be a reasonable and affordable option. It is a good idea to have up to date Learn how to give space to your space here with this blog!carbon monoxide sensors with regularly checked batteries in your home if this heating option is considered optimal. Using a heater with a combustible heat source can deplete the oxygen in the air or cause a potentially deadly buildup of carbon monoxide. Maintaining good air circulation, ensuring appropriate ventilation, and only using fuel-based heaters in more open areas can prevent these dangers. The use of a fuel based heater should always be accompanied with cracking nearby windows open a bit, to ensure air flow. Fuel-based heaters should always be used with the fuel source they were designed for. Mixing or switching combustible fuel sources can prove dangerous and increases the risk of fire. Modern fuel-based heaters now come with oxygen sensors that will extinguish the heater if surrounding oxygen levels drop below a certain point. Kerosene and other fuel heaters have a stronger ability to heat a larger space in comparison to electric heating units. The heat efficiency comes at the cost of a higher risk of heat damage, fire, oxygen depletion, and buildup of carbon monoxide. Additionally, the heating unit itself will require maintenance to continue operating efficiently and safely. As long as the heater itself is maintained well, used within safety standards, and kept clean, fuel-based heaters can be a good home heating option.

Electric heaters are another affordable and effective option. Generally, electric heaters use a heating element consisting of coils that heat up and radiate heat to the surrounding area. Occasionally they are accompanied by a built-in fan to disperse the heat. Electric heating units are best used for smaller areas, as they do not produce enough heat to encompass a large area in most cases. Electric heaters can pose a fire risk if they are running near flammable materials, are not kept clean, and are not being operated by manufacturer specifications. Most modern units come equipped with sensors and automatic shut off abilities to prevent dangerous situations. Just like fuel-based heating units, electric heaters are best kept a minimum of 36 inches from any other objects.

Fire Safety

Space heaters and fire safety should be kept in mind regardless of which type of heater is being used. There are numerous simple steps that can be taken to prevent fire, personal injury, or additional heat damage. Besides ensuring that any personal heater is kept a minimum of 36 inches from any and all nearby objects, it is also wise to ensure that no fabrics or flammable materials could possibly fall onto the heater. Keeping everything a reasonable distance from the heat source will prevent personal injury or property damage. The close heat may feel nice for a time, but the long-term risks are not worth a few moments of intense heat. The heating element should always be turned off when no one will be awake or around the heater. Modern electric heaters are almost always equipped with an automatic timed shut off feature to prevent fire or damages due to extended use. It is better to manually turn any and all heaters off personally rather than relying on the automatic shut off features. Heaters should always be kept on flat, dry surfaces to prevent tipping over or electrical issues. Electric heaters especially must be used in dry areas with no risk of water exposure. Always plug electric heaters directly into a wall outlet, never into an extension cord or power strip. Extension cords and power strips can overheat easily and pose a fire safety risk. While this may pose a small difficulty in arranging a safe place for the heater to do its job, it is better to move belongings out of the way and plug it in safely rather than using a potentially dangerous extension cord for the sake of simplicity. As with all electrical appliances, the potential for shock is present with electrical heaters. If electrical issues are suspected in the home, do not use an electric space heater until an electrical professional has checked for safety issues and determined that it is safe. Checking with an electrical professional for any potential issues can prevent unforeseen damages and ensures that electrical heaters can be used as efficiently and safely as possible. All standalone space heating units, regardless of type, should be kept clean, dry, and away from pets, loose fabrics, and children. By taking the time to ensure optimal safety conditions and giving the heater the space it requires, any person in home heating option can be used to keep a room or a whole home toasty and cozy all winter long.

Mister Sparky Electrician NWA, America’s On-Time Electrician in Bella Vista, Bentonville, Rogers, Springdale and Fayetteville services the Northwest Arkansas area with a team of licensed electricians. In addition to flickering lights, some of the electrician services provided by the company include electrical outlet/switch repair, ceiling fan installation, lighting installation, electrical wiring repair, landscape lighting installation and home electrical inspections.

  Category: Uncategorized
  Comments: Comments Off on Space Heater: Give them space!

How to clean your Electronics

By Springdale Electrician,

How to clean your electronics to ensure your safety.

How to clean your Electronics

Your electronic gadgets mean everything to you. After all, they are your go-to devices for just about everything — social media, gaming, browsing the Internet and of course, phone calls and text messaging. Unfortunately, with all the usage they get on a daily basis, they can become quite dirty and even seeped with nasty substances you may not even be able to see. Bacterium, E-coli, dirt and even fecal matter can be hidden on your electronic devices. Therefore it is important to clean your electronics.

Although this knowledge may make you want to gag, it’s a part of life. Tossing your gadgets into a bucket of bleach is not the answer, either. However, there are safe and effective ways to clean your electronics so that they’re practically sparkling. Keep in mind that certain devices have special requirements for cleaning. Here are the ways you can sanitize your electronics.

Smartphones and Tablets

Unfortunately, smartphones and tablets tend to be the grimiest devices of them all because it’s not unusual to bring them into the bathroom with you. Smartphones tend to have How to clean your electronics properly to prevent you from getting sick.ten times the amount of bacteria of toilet seats. When you clean the screen of a phone or tablet, you have to be very careful because they usually contain an oleophobic coating to resist fingerprint staining, which can be wiped off if you use harsh chemicals. If a tempered glass screen protectors cover your device, you should be equally cautious as they too contain an oleophobic coating. If you are worried about damaging the screen or the device in general, use water and a microfiber cloth to clean it. You can get into the smallest areas of your phones and tablets, such as the edges and nooks, by wiping at them with a cotton swab. You can also use a mixture of water and alcohol in a spray bottle and wipe down the devices with a microfiber cloth.

Always take care and only spray water or cleaner onto the microfiber cloth and never directly onto your smartphone or tablet. Of course, you should always remove the case and clean that as well in the same manner. Dry it thoroughly before putting it back on your device.

There are also wipes that are specifically made to clean your electronics. These are gentle on the screens of phones and tablets and can eliminate all the grime and grit they accumulate.

Laptops

Laptops can quickly pick up plenty of dirt and even germs, especially if you tote it on occasion. However, you can clean your electronics like laptops rapidly relatively to start by first picking it up, turning it upside down and shaking it out. This will eliminate any crumbs and dirt that may have snuck into the keyboard. Another good option is to use a can of compressed air to blow all the debris out.

Unplug the laptop and, if possible, remove its battery for the next step. Spritz some screen cleaning spray onto a microfiber cloth and rub the screen and all the surfaces of the device. You may also want to go over the keyboard as the last step in cleaning it in case the other measures weren’t completely effective.

Since LCD screens are particularly sensitive, you might want to use a special cleaner to prevent getting streaks that other cleaners leave in their wake. If your laptop has a touchscreen, you can use water, or an eyeglass cleaner sprayed on a microfiber cloth. There are also cleaning wipes made for cleaning laptop and tablet screens that can clean your electronics very effectively.

Desktop Computers

Another good way to clean your electronics involves applying alcohol or hydrogen peroxide to your desktop’s keyboard. These components can get dusty and  You can get sick if you do not clean your electronics.dirty over time, especially if you have a habit of eating or drinking at your computer. Turn the keyboard upside down and shake out any crumbs and other debris that might have gotten stuck in the keys. You can also use compressed air to push it out. If the keyboard is sticky, you can use alcohol mixed with water or a combination of water and hydrogen peroxide to scrub it down.

To clean your monitor, you should only use cleaners made explicitly for LCD screens. You can also use water or eyeglass cleaner on a microfiber cloth to gently wipe it down. Avoid using cleaners like Windex, which can damage the screen. However, plastic components that surround the screen can be used with Windex. Otherwise, plain water works as well. Plain distilled water is one of the best substances with which to clean your electronics.

TV Sets

Since TV screens are made from LCDs, you have to take care when cleaning them. Clean your electronics that consist of LCD screens by using distilled water or a particular screen cleaner. Spritz it onto a microfiber cloth and gently wipe the screen. However, in addition to the screen, you’ll also want to clean your remotes. They can get sticky, dusty and filled with crumbs if you eat while using them. Canned air and a water mixture can make them look like new.

Game Consoles

It’s only natural for your game console to become full of dust over time. Dust can have a negative impact on your game performance and can make the console act wonky in general. To clean your electronics of this variety, you should start by dusting them with a duster or microfiber cloth. You can also use a tiny bit of water on a clean cloth to clean it. Use a cotton swab dipped in water to clear out any crevices as well. Avoid going into ports.

You can also clean your controllers using special wipes. They can effectively get rid of germs and clean away any sticky gunk that might have built up over time.

It’s important to know how to clean your electronics and do it every so often correctly. These actions can help make your consoles last longer and not hinder the performance.

Mister Sparky Electrician NWA, America’s On-Time Electrician in Bella Vista, Bentonville, Rogers, Springdale and Fayetteville services the Northwest Arkansas area with a team of licensed electricians. In addition to flickering lights, some of the electrician services provided by the company include electrical outlet/switch repair, ceiling fan installation, lighting installation, electrical wiring repair, landscape lighting installation and home electrical inspections.

  Category: Uncategorized
  Comments: Comments Off on How to clean your Electronics

Everything You Need to Know About a Power Surge

By Springdale Electrician,

Everything You Need to Know About a Power Surge

You may be sitting at home and watching the TV when suddenly your lights flicker. Your TV shuts off without the use of a controller. You may even hear a popping sound. At the time, you may think nothing of it. Perhaps a tree branch touched a power line and momentarily interrupted the electric flow to your home. When you attempt to turn your TV back on, however, you suddenly that it refuses to work at all. You’ve become the victim of a robust power surge.

These incidents can occur at any time, though there are usually a few indicating factors that could result in a power surge. What may be the cause, what might happen to your electrical devices as a result, and how an electrician can help, this

Mister Sparky Springdale checking a power surge.

article will touch on the topics above and shed some light.

Cause And Effects

In some cases, a power surge can occur because of a spike is initiated when a high-power electrical device is activated. This electrical device could be your refrigerator, space heater, or even your air conditioner. By kicking on, the device sends a spark along the electrical current which is transferred to the rest of the plugged-in devices of your home.

When it comes to cause and effects of power surges, your electrician is likely always going to take a look at the state of your house’s wiring. Many power surges can occur because of faulty or inadequate wiring. Usually, a house is wired to protect itself against these spikes, but if the wires aren’t equipped with the proper devices or just incorrectly installed, then that spike is headed right for your plugged-in devices.

Besides the wiring, tripped circuit breakers and short circuits within your wiring system is another factor that could result in a power surge. Because the circuit breaker is the neural network of how your wiring and the electric system works in your home, it’s paramount that you have an electrician take a look at it. They’re the only ones who understand the safety hazards of working with circuits and wiring and as such should be allowed to do their thing.

In addition to old and faulty wiring and circuits, a surge might occur because there are too many devices plugged into a circuit. This happens as well as power strips that have become increasingly popular. You should note that not all of the power strips come with surge protection. As a result, if you plug too many high-powered devices into that strip, a surge couldlightning causing a Power Surge near a Springdale electrician. occur, and all of the devices plugged into the strip could be damaged.

While it may seem somewhat contrary, surges can occur due to a power outage as well. Perhaps you’ve even noticed that when the power is back on, there’s a brief moment when your lights burn a bit brighter than they typically do. Typically, this is because there’s just a lot of excess power in the wiring. It regulates quite quickly before damage can place. However, there are cases where the surge is so powerful that it leads to a spike and damages your electronics.

Perhaps the most popular cause of power surges is lightning strikes. You may think that your house needs to be struck by lightning for the power surge to occur. That isn’t the case. While being struck by lightning will undoubtedly result in a power surge, the bolt can also hit quite a distance away, and you might still experience the consequences of a power surge. If the lightning hits or strikes close to a power line, that’s an electrical surge that is shooting down the power line right to your home. The power of this spike is enough to damage your TV, computer, router, gaming system, and practically any other beloved electron device that’s plugged into the wall.

Power Surge Danger?

You may wonder if power surges can be dangerous. To your electrical devices, they pose as quite the threat. Many electronics are not suited for a power surge. When a spike occurs, it travels to the device and essentially fries the delicate mechanisms within the device. Because spikes can happen at any time, your electronics are under threat of being severely damaged.

Besides posing a threat to your electronics, however, a power surge can also threaten your home. A powerful enough surge can start a fire in your home.

For those with young children who like to poke items inside of a wall outlet, the lethal consequences are quite clear. Even without a surge, the shock could seriously harm them. However, add-in a power surge, and there’s a tragedy on hand.

Be Safe And Hire An Electrician

If you notice that your house is repeatedly receiving power surges, you should call an electrician to protect your home. Doing so yourself is extremely dangerous and could lead to lethal consequences. By having an electrician perform the job for you, they can do so in a safe manner and inspect your house and its wiring and electrical system. With their experienced eye, they can detect the critical problems of your system and provide practical solutions to keep your home, electronics, and family safe. Act quickly, so you don’t lose any of your electronics to the next surge.

Mister Sparky Electrician NWA, America’s On-Time Electrician in Bella Vista, Bentonville, Rogers, Springdale and Fayetteville services the Northwest Arkansas area with a team of licensed electricians. In addition to flickering lights, some of the electrician services provided by the company include electrical outlet/switch repair, ceiling fan installation, lighting installation, electrical wiring repair, landscape lighting installation and home electrical inspections.

  Category: Uncategorized
  Comments: Comments Off on Everything You Need to Know About a Power Surge

3 DIY Halloween Lighting Ideas

By Springdale Electrician,

Get in the spirit with Mister Sparky Springdale electricians with halloween lighting ideas.

3 DIY Halloween Lighting Ideas

One of the best ways to make a home look ready for Halloween is by changing the lighting. The right lighting can create a spooky atmosphere and accent a variety of Halloween decorations. Check out these cute Halloween lighting ideas that can easily be made with basic craft store items.

Mummy Mason Jars

These adorable mason jars are Halloween lighting ideas that can be made with young children. The Halloween lighting ideas make a great centerpiece on the table, or they can be stuck on shelves around the house to make a spooky little decorating accent. This Idea was found at the DIYnetwork!

Rogers electricians showing Halloween Lighting Ideas.

This Idea was found here DIYnetwork!

Required items:
• Mason jars of various sizes
• Googly eyes
• Battery powered candles
• Gauze bandages
• Decoupage glue

Instructions
1. Cut the gauze bandages in half lengthways to make narrower strips.
2. Paint the outside of the mason jar with the decoupage glue.
3. Gently wind the gauze around the jar, crisscrossing and angling the strips as desired. Go from the bottom all the way to the top.
4. Paint another layer of the glue on the jar to make it stick.
5. Gently glue two googly eyes to the middle of the jar.
6. Place the battery powered candle inside of the jar and turn it on.

Halloween Luminaries

When the light is not on, these little Halloween lighting ideas will just look like they are plain white. However, once you turn them on, you will see cute silhouettes of a witch, cat, pumpkin, or whatever else you want. This simple Halloween lighting ideas project just requires six items and a few minutes of your time. This Halloween Luminaries idea came from the making lemonade blog.

witches fly with these Halloween Lighting ideas by Rogers Electricians.

Click here for the original page making lemonade blog.

Required items:
• Stickers or die cuts of Halloween themed silhouettes
• Glass vases
• Freezer paper
• Tape
• Scissors
• Electric tealights

Instructions
1. Measure the glass vase and cut freezer paper to a height and width that allows you to wrap it around the vase.
2. Decorate the waxy side of the paper with your desired stickers or die cuts.
3. Wrap the paper around the vase with the stickers on the inside. Tape it in place.
4. Place tea lights inside and turn them on.

Jack O’ Lantern

This has been the most common Halloween lighting idea for centuries. This may not be the Newest way to light up your Halloween, but it has been proven to provide a fun time for anyone involved. This Halloween Lighting Idea allows you to have the creativity flow as you carve your pumpkin. There is never a bad Jack O’ Lantern!

Required Items:
• A Medium/Large Size pumpkin
• Medium-Large Size knife
• (optional) Pumpkin carving kit
• Thumb Tac
• Spoon

Instructions:
Cut a circle around the top of the pumpkin Stem and set aside. Lift the recently cut piece off the pumpkin and begin to get rid of all of the pumpkin guts. Use the spoon to go around the inside of the pumpkin to ensure the pumpkin is clean on the inside. Next, use the thumb tac to put tiny holes in the pumpkin to use as a stencil for when you start to carve the pumpkin. Once you have cut along the holes of your pumpkin, place a candle in it and watch it glow!

Mister Sparky Electrician NWA, America’s On-Time Electrician in Bella Vista, Bentonville, Rogers, Springdale and Fayetteville services the Northwest Arkansas area with a team of licensed electricians. In addition to flickering lights, some of the electrician services provided by the company include electrical outlet/switch repair, ceiling fan installation, lighting installation, electrical wiring repair, landscape lighting installation and home electrical inspections.

  Category: Uncategorized
  Comments: Comments Off on 3 DIY Halloween Lighting Ideas

What is Electrical Grounding?

By Springdale Electrician,

Mister Sparky electricians showing an electrical grounding wire.

Electrical Grounding

Electrical grounds are one of the most essential safety components of a home’s electrical system. Why do you need to ground electricity and what does this entail? A ground wire connects the outlets in your home to the electrical panel; this wire is dug into the ground surrounding your home. The soil that surrounds the wire acts as a kind of surge protector. If an excessive amount of electricity flows through the grounded wire the positively charged ions within the wire are attracted to the negatively charged ions found in the surrounding soil. This allows for the excess energy to dissipate into the ground instead of overloading the electrical system, which could create fire hazards and damage home appliances.

How electrical grounding works

Electrical circuits have what’s known as a neutral wire, which carries the electrical current back to the source of the electricity. The circuit also has an active wire, which supplies the power.
The ground wire is attached between the breaker box and the electrical outlets. In the event of excess electricity the current flows through the ground wire instead of back through the neutral wire, which then trips the circuit breaker or blows a fuse.

Why electricity need to be grounded

Excessive electricity within a home is a fairly common occurrence. Whenever an appliance is plugged into an outlet, its rare that all of the supplied electricity is used, meaning that the leftover energy needs to be absorbed safely. Excess electricity is also a common as larger home appliances cycle on and off, not to mention the risk of lightning strikes flooding a home’s electrical system. The risk of fire and home appliance damage is incredibly high in homes that don’t have electrical grounds.

What happens without an adequate ground?

With the correct grounding, the earth will absorb the excess electrical Mister Sparky NWA electricians showing an electrical grounds wire to a metal object.current, and it will do it safely. Without this option for absorption, the excess electricity will find other paths to travel. This means appliances that are plugged in and anything in direct contact with the appliance. This creates an electrocution hazard for anyone that lives in the home.

If you suspect that an electrical appliance or electrical panel does not have ground, don’t use it and call an electrician immediately! Without the proper grounding, anyone using the appliance could potentially become the ground connection, which could prove to be fatal.

How to tell if a home has been properly grounded

One of the best ways that a person can make sure that their home has received the correct grounding would be calling an electrician for a home safety inspection. Under the National Electric Code, household electrical systems are required to be grounded through a ground rod, but with older homes, its common for them to lack the proper grounding.

Why grounding matters

First, the protection against an electrical overload cannot be understated. This is one of the most important reasons because it will protect the home, the appliances, and everyone in the home from the dangers of electrical surges.

Second, it helps to direct electricity. A grounded electrical system safely directs electricity within the home and manages excess electricity.

Third, electrical grounds help to stabilize the voltage level of your home’s electrical system. Grounding makes it far easier for the correct amount of power to be distributed, and it plays a vital role in ensuring that circuits are not overloaded.

Hiring a professional

Electrical grounds are an incredibly important facet of your home’s electrical safety plan; new ground installation or ground inspections should always be performed by licensed electricians. Mistakes can leave your home vulnerable to the dangers of surges and electrical overloads. For questions concerning electrical grounds or if you would like to schedule a home electrical inspection, call Mister Sparky NWA electricians at (479) 202-4757.

Mister Sparky Electrician NWA, America’s On-Time Electrician in Bella Vista, Bentonville, Rogers, Springdale and Fayetteville services the Northwest Arkansas area with a team of licensed electricians. In addition to flickering lights, some of the electrician services provided by the company include electrical outlet/switch repair, ceiling fan installation, lighting installation, electrical wiring repair, landscape lighting installation and home electrical inspections.

  Category: Uncategorized
  Comments: Comments Off on What is Electrical Grounding?