Category: Uncategorized


How to clean your Electronics

By Springdale Electrician,

How to clean your electronics to ensure your safety.

How to clean your Electronics

Your electronic gadgets mean everything to you. After all, they are your go-to devices for just about everything — social media, gaming, browsing the Internet and of course, phone calls and text messaging. Unfortunately, with all the usage they get on a daily basis, they can become quite dirty and even seeped with nasty substances you may not even be able to see. Bacterium, E-coli, dirt and even fecal matter can be hidden on your electronic devices. Therefore it is important to clean your electronics.

Although this knowledge may make you want to gag, it’s a part of life. Tossing your gadgets into a bucket of bleach is not the answer, either. However, there are safe and effective ways to clean your electronics so that they’re practically sparkling. Keep in mind that certain devices have special requirements for cleaning. Here are the ways you can sanitize your electronics.

Smartphones and Tablets

Unfortunately, smartphones and tablets tend to be the grimiest devices of them all because it’s not unusual to bring them into the bathroom with you. Smartphones tend to have How to clean your electronics properly to prevent you from getting sick.ten times the amount of bacteria of toilet seats. When you clean the screen of a phone or tablet, you have to be very careful because they usually contain an oleophobic coating to resist fingerprint staining, which can be wiped off if you use harsh chemicals. If a tempered glass screen protectors cover your device, you should be equally cautious as they too contain an oleophobic coating. If you are worried about damaging the screen or the device in general, use water and a microfiber cloth to clean it. You can get into the smallest areas of your phones and tablets, such as the edges and nooks, by wiping at them with a cotton swab. You can also use a mixture of water and alcohol in a spray bottle and wipe down the devices with a microfiber cloth.

Always take care and only spray water or cleaner onto the microfiber cloth and never directly onto your smartphone or tablet. Of course, you should always remove the case and clean that as well in the same manner. Dry it thoroughly before putting it back on your device.

There are also wipes that are specifically made to clean your electronics. These are gentle on the screens of phones and tablets and can eliminate all the grime and grit they accumulate.

Laptops

Laptops can quickly pick up plenty of dirt and even germs, especially if you tote it on occasion. However, you can clean your electronics like laptops rapidly relatively to start by first picking it up, turning it upside down and shaking it out. This will eliminate any crumbs and dirt that may have snuck into the keyboard. Another good option is to use a can of compressed air to blow all the debris out.

Unplug the laptop and, if possible, remove its battery for the next step. Spritz some screen cleaning spray onto a microfiber cloth and rub the screen and all the surfaces of the device. You may also want to go over the keyboard as the last step in cleaning it in case the other measures weren’t completely effective.

Since LCD screens are particularly sensitive, you might want to use a special cleaner to prevent getting streaks that other cleaners leave in their wake. If your laptop has a touchscreen, you can use water, or an eyeglass cleaner sprayed on a microfiber cloth. There are also cleaning wipes made for cleaning laptop and tablet screens that can clean your electronics very effectively.

Desktop Computers

Another good way to clean your electronics involves applying alcohol or hydrogen peroxide to your desktop’s keyboard. These components can get dusty and  You can get sick if you do not clean your electronics.dirty over time, especially if you have a habit of eating or drinking at your computer. Turn the keyboard upside down and shake out any crumbs and other debris that might have gotten stuck in the keys. You can also use compressed air to push it out. If the keyboard is sticky, you can use alcohol mixed with water or a combination of water and hydrogen peroxide to scrub it down.

To clean your monitor, you should only use cleaners made explicitly for LCD screens. You can also use water or eyeglass cleaner on a microfiber cloth to gently wipe it down. Avoid using cleaners like Windex, which can damage the screen. However, plastic components that surround the screen can be used with Windex. Otherwise, plain water works as well. Plain distilled water is one of the best substances with which to clean your electronics.

TV Sets

Since TV screens are made from LCDs, you have to take care when cleaning them. Clean your electronics that consist of LCD screens by using distilled water or a particular screen cleaner. Spritz it onto a microfiber cloth and gently wipe the screen. However, in addition to the screen, you’ll also want to clean your remotes. They can get sticky, dusty and filled with crumbs if you eat while using them. Canned air and a water mixture can make them look like new.

Game Consoles

It’s only natural for your game console to become full of dust over time. Dust can have a negative impact on your game performance and can make the console act wonky in general. To clean your electronics of this variety, you should start by dusting them with a duster or microfiber cloth. You can also use a tiny bit of water on a clean cloth to clean it. Use a cotton swab dipped in water to clear out any crevices as well. Avoid going into ports.

You can also clean your controllers using special wipes. They can effectively get rid of germs and clean away any sticky gunk that might have built up over time.

It’s important to know how to clean your electronics and do it every so often correctly. These actions can help make your consoles last longer and not hinder the performance.

Mister Sparky Electrician NWA, America’s On-Time Electrician in Bella Vista, Bentonville, Rogers, Springdale and Fayetteville services the Northwest Arkansas area with a team of licensed electricians. In addition to flickering lights, some of the electrician services provided by the company include electrical outlet/switch repair, ceiling fan installation, lighting installation, electrical wiring repair, landscape lighting installation and home electrical inspections.

  Category: Uncategorized
  Comments: Comments Off on How to clean your Electronics

Everything You Need to Know About a Power Surge

By Springdale Electrician,

Everything You Need to Know About a Power Surge

You may be sitting at home and watching the TV when suddenly your lights flicker. Your TV shuts off without the use of a controller. You may even hear a popping sound. At the time, you may think nothing of it. Perhaps a tree branch touched a power line and momentarily interrupted the electric flow to your home. When you attempt to turn your TV back on, however, you suddenly that it refuses to work at all. You’ve become the victim of a robust power surge.

These incidents can occur at any time, though there are usually a few indicating factors that could result in a power surge. What may be the cause, what might happen to your electrical devices as a result, and how an electrician can help, this

Mister Sparky Springdale checking a power surge.

article will touch on the topics above and shed some light.

Cause And Effects

In some cases, a power surge can occur because of a spike is initiated when a high-power electrical device is activated. This electrical device could be your refrigerator, space heater, or even your air conditioner. By kicking on, the device sends a spark along the electrical current which is transferred to the rest of the plugged-in devices of your home.

When it comes to cause and effects of power surges, your electrician is likely always going to take a look at the state of your house’s wiring. Many power surges can occur because of faulty or inadequate wiring. Usually, a house is wired to protect itself against these spikes, but if the wires aren’t equipped with the proper devices or just incorrectly installed, then that spike is headed right for your plugged-in devices.

Besides the wiring, tripped circuit breakers and short circuits within your wiring system is another factor that could result in a power surge. Because the circuit breaker is the neural network of how your wiring and the electric system works in your home, it’s paramount that you have an electrician take a look at it. They’re the only ones who understand the safety hazards of working with circuits and wiring and as such should be allowed to do their thing.

In addition to old and faulty wiring and circuits, a surge might occur because there are too many devices plugged into a circuit. This happens as well as power strips that have become increasingly popular. You should note that not all of the power strips come with surge protection. As a result, if you plug too many high-powered devices into that strip, a surge couldlightning causing a Power Surge near a Springdale electrician. occur, and all of the devices plugged into the strip could be damaged.

While it may seem somewhat contrary, surges can occur due to a power outage as well. Perhaps you’ve even noticed that when the power is back on, there’s a brief moment when your lights burn a bit brighter than they typically do. Typically, this is because there’s just a lot of excess power in the wiring. It regulates quite quickly before damage can place. However, there are cases where the surge is so powerful that it leads to a spike and damages your electronics.

Perhaps the most popular cause of power surges is lightning strikes. You may think that your house needs to be struck by lightning for the power surge to occur. That isn’t the case. While being struck by lightning will undoubtedly result in a power surge, the bolt can also hit quite a distance away, and you might still experience the consequences of a power surge. If the lightning hits or strikes close to a power line, that’s an electrical surge that is shooting down the power line right to your home. The power of this spike is enough to damage your TV, computer, router, gaming system, and practically any other beloved electron device that’s plugged into the wall.

Power Surge Danger?

You may wonder if power surges can be dangerous. To your electrical devices, they pose as quite the threat. Many electronics are not suited for a power surge. When a spike occurs, it travels to the device and essentially fries the delicate mechanisms within the device. Because spikes can happen at any time, your electronics are under threat of being severely damaged.

Besides posing a threat to your electronics, however, a power surge can also threaten your home. A powerful enough surge can start a fire in your home.

For those with young children who like to poke items inside of a wall outlet, the lethal consequences are quite clear. Even without a surge, the shock could seriously harm them. However, add-in a power surge, and there’s a tragedy on hand.

Be Safe And Hire An Electrician

If you notice that your house is repeatedly receiving power surges, you should call an electrician to protect your home. Doing so yourself is extremely dangerous and could lead to lethal consequences. By having an electrician perform the job for you, they can do so in a safe manner and inspect your house and its wiring and electrical system. With their experienced eye, they can detect the critical problems of your system and provide practical solutions to keep your home, electronics, and family safe. Act quickly, so you don’t lose any of your electronics to the next surge.

Mister Sparky Electrician NWA, America’s On-Time Electrician in Bella Vista, Bentonville, Rogers, Springdale and Fayetteville services the Northwest Arkansas area with a team of licensed electricians. In addition to flickering lights, some of the electrician services provided by the company include electrical outlet/switch repair, ceiling fan installation, lighting installation, electrical wiring repair, landscape lighting installation and home electrical inspections.

  Category: Uncategorized
  Comments: Comments Off on Everything You Need to Know About a Power Surge

3 DIY Halloween Lighting Ideas

By Springdale Electrician,

Get in the spirit with Mister Sparky Springdale electricians with halloween lighting ideas.

3 DIY Halloween Lighting Ideas

One of the best ways to make a home look ready for Halloween is by changing the lighting. The right lighting can create a spooky atmosphere and accent a variety of Halloween decorations. Check out these cute Halloween lighting ideas that can easily be made with basic craft store items.

Mummy Mason Jars

These adorable mason jars are Halloween lighting ideas that can be made with young children. The Halloween lighting ideas make a great centerpiece on the table, or they can be stuck on shelves around the house to make a spooky little decorating accent. This Idea was found at the DIYnetwork!

Rogers electricians showing Halloween Lighting Ideas.

This Idea was found here DIYnetwork!

Required items:
• Mason jars of various sizes
• Googly eyes
• Battery powered candles
• Gauze bandages
• Decoupage glue

Instructions
1. Cut the gauze bandages in half lengthways to make narrower strips.
2. Paint the outside of the mason jar with the decoupage glue.
3. Gently wind the gauze around the jar, crisscrossing and angling the strips as desired. Go from the bottom all the way to the top.
4. Paint another layer of the glue on the jar to make it stick.
5. Gently glue two googly eyes to the middle of the jar.
6. Place the battery powered candle inside of the jar and turn it on.

Halloween Luminaries

When the light is not on, these little Halloween lighting ideas will just look like they are plain white. However, once you turn them on, you will see cute silhouettes of a witch, cat, pumpkin, or whatever else you want. This simple Halloween lighting ideas project just requires six items and a few minutes of your time. This Halloween Luminaries idea came from the making lemonade blog.

witches fly with these Halloween Lighting ideas by Rogers Electricians.

Click here for the original page making lemonade blog.

Required items:
• Stickers or die cuts of Halloween themed silhouettes
• Glass vases
• Freezer paper
• Tape
• Scissors
• Electric tealights

Instructions
1. Measure the glass vase and cut freezer paper to a height and width that allows you to wrap it around the vase.
2. Decorate the waxy side of the paper with your desired stickers or die cuts.
3. Wrap the paper around the vase with the stickers on the inside. Tape it in place.
4. Place tea lights inside and turn them on.

Jack O’ Lantern

This has been the most common Halloween lighting idea for centuries. This may not be the Newest way to light up your Halloween, but it has been proven to provide a fun time for anyone involved. This Halloween Lighting Idea allows you to have the creativity flow as you carve your pumpkin. There is never a bad Jack O’ Lantern!

Required Items:
• A Medium/Large Size pumpkin
• Medium-Large Size knife
• (optional) Pumpkin carving kit
• Thumb Tac
• Spoon

Instructions:
Cut a circle around the top of the pumpkin Stem and set aside. Lift the recently cut piece off the pumpkin and begin to get rid of all of the pumpkin guts. Use the spoon to go around the inside of the pumpkin to ensure the pumpkin is clean on the inside. Next, use the thumb tac to put tiny holes in the pumpkin to use as a stencil for when you start to carve the pumpkin. Once you have cut along the holes of your pumpkin, place a candle in it and watch it glow!

Mister Sparky Electrician NWA, America’s On-Time Electrician in Bella Vista, Bentonville, Rogers, Springdale and Fayetteville services the Northwest Arkansas area with a team of licensed electricians. In addition to flickering lights, some of the electrician services provided by the company include electrical outlet/switch repair, ceiling fan installation, lighting installation, electrical wiring repair, landscape lighting installation and home electrical inspections.

  Category: Uncategorized
  Comments: Comments Off on 3 DIY Halloween Lighting Ideas

What is Electrical Grounding?

By Springdale Electrician,

Mister Sparky electricians showing an electrical grounding wire.

Electrical Grounding

Electrical grounds are one of the most essential safety components of a home’s electrical system. Why do you need to ground electricity and what does this entail? A ground wire connects the outlets in your home to the electrical panel; this wire is dug into the ground surrounding your home. The soil that surrounds the wire acts as a kind of surge protector. If an excessive amount of electricity flows through the grounded wire the positively charged ions within the wire are attracted to the negatively charged ions found in the surrounding soil. This allows for the excess energy to dissipate into the ground instead of overloading the electrical system, which could create fire hazards and damage home appliances.

How electrical grounding works

Electrical circuits have what’s known as a neutral wire, which carries the electrical current back to the source of the electricity. The circuit also has an active wire, which supplies the power.
The ground wire is attached between the breaker box and the electrical outlets. In the event of excess electricity the current flows through the ground wire instead of back through the neutral wire, which then trips the circuit breaker or blows a fuse.

Why electricity need to be grounded

Excessive electricity within a home is a fairly common occurrence. Whenever an appliance is plugged into an outlet, its rare that all of the supplied electricity is used, meaning that the leftover energy needs to be absorbed safely. Excess electricity is also a common as larger home appliances cycle on and off, not to mention the risk of lightning strikes flooding a home’s electrical system. The risk of fire and home appliance damage is incredibly high in homes that don’t have electrical grounds.

What happens without an adequate ground?

With the correct grounding, the earth will absorb the excess electrical Mister Sparky NWA electricians showing an electrical grounds wire to a metal object.current, and it will do it safely. Without this option for absorption, the excess electricity will find other paths to travel. This means appliances that are plugged in and anything in direct contact with the appliance. This creates an electrocution hazard for anyone that lives in the home.

If you suspect that an electrical appliance or electrical panel does not have ground, don’t use it and call an electrician immediately! Without the proper grounding, anyone using the appliance could potentially become the ground connection, which could prove to be fatal.

How to tell if a home has been properly grounded

One of the best ways that a person can make sure that their home has received the correct grounding would be calling an electrician for a home safety inspection. Under the National Electric Code, household electrical systems are required to be grounded through a ground rod, but with older homes, its common for them to lack the proper grounding.

Why grounding matters

First, the protection against an electrical overload cannot be understated. This is one of the most important reasons because it will protect the home, the appliances, and everyone in the home from the dangers of electrical surges.

Second, it helps to direct electricity. A grounded electrical system safely directs electricity within the home and manages excess electricity.

Third, electrical grounds help to stabilize the voltage level of your home’s electrical system. Grounding makes it far easier for the correct amount of power to be distributed, and it plays a vital role in ensuring that circuits are not overloaded.

Hiring a professional

Electrical grounds are an incredibly important facet of your home’s electrical safety plan; new ground installation or ground inspections should always be performed by licensed electricians. Mistakes can leave your home vulnerable to the dangers of surges and electrical overloads. For questions concerning electrical grounds or if you would like to schedule a home electrical inspection, call Mister Sparky NWA electricians at (479) 202-4757.

Mister Sparky Electrician NWA, America’s On-Time Electrician in Bella Vista, Bentonville, Rogers, Springdale and Fayetteville services the Northwest Arkansas area with a team of licensed electricians. In addition to flickering lights, some of the electrician services provided by the company include electrical outlet/switch repair, ceiling fan installation, lighting installation, electrical wiring repair, landscape lighting installation and home electrical inspections.

  Category: Uncategorized
  Comments: Comments Off on What is Electrical Grounding?

Common Electrical Outlet Problems

By Springdale Electrician,

Learn about electrical outlet problems with Mister Sparky NWA electrician

Common Electrical Outlet Problems

In today’s world, almost everything in a home uses electricity. We flip a switch Call Mister Sparky NWA electricians when you have electrical outlet problems.or plug in an item. “Voilà,” it works. A properly functioning outlet is essential for the electric current to flow properly to power appliances and devices in our homes. Our small appliances are essential for making coffee and cooking. We are at a loss if our entertainment items are unable to work. Everything usually works fine until you experience electrical outlet problems. Many people encounter electrical outlet problems and should know warning signs that could lead to a hazardous situation.

Causes of Common Electrical Outlet Problems

Sometimes one or a combination of factors may lead to electrical outlet problems that need to be addressed. These factors include:

  • Tripped Circuit Breakers
  • Tripped GFCI
  • Age – Over time outlets and their connections become worn, creating faulty electrical connections.
  • Worn Out Outlets – An outlet that receives heavy usage tends to experience problems earlier than one that is rarely used.
  • Quality of materials – Most outlets are made of plastic, but differences in material quality can impact how the outlet functions.
  • Overloaded circuits – Since there are so many electrical devices in a house, your circuit can easily get overloaded. This definitely produces electrical problems with your outlets and in your wiring system.

Electricians are asked these question quite often:

  • Why did my outlet suddenly stop working?
  • Is this a dangerous situation?
  • Is it just the outlet or my home wiring system?

In order to give a correct response, the electrician needs to do an inspection. Until an electrician arrives, it is a good idea to leave the outlet alone, and turn off the circuit in your electrical panel box that sends electricity to that panel.

Symptoms of Common Electrical Outlet Problems

Malfunctions from electrical outlets cause house fires each year. According to the Electrical Safety Foundation International, many of these fires are preventable. If you notice these common electrical outlet problems, then you know that you need to consult with a residential electrician for a home inspection.

  • Buzzing sound at or near an outlet
  • Burning smell
  • Loose switch plates
  • Cracks in the outlet
  • Hot switch plates
  • Sparks from the outlet
  • Blown fuses

These symptoms indicate that there are issues with your electrical outlets. Sparks from the outlet and burning smells are problems that require immediate action. Promptly addressing common electrical outlet problems can prevent further damage to your wiring system and possibly eliminate the danger of a house fire.

Basic Troubleshooting and Safety Issues

Troubleshooting does not mean trying to diagnose and repair an outlet. These suggestions are a few common sense approaches to determine if you need a professional.

Sometimes, the problem is not the outlet at all, but it may be the item Mister Sparky NWA showing common electrical outlet problems.you are using. The safest way to check to determine if the outlet or the small appliance or device is not functioning correctly is to plug the machine into another outlet. If it works, then you know that the outlet is experiencing a problem.

An often overlooked place to check for problems is the top and bottom sections of an outlet. Sometimes the top half works and the bottom does not. Plug something in each section to be sure the entire outlet is working correctly. If you discover that only one part is functional, then you do not need to use that outlet at all. This is a clue that it needs to be replaced by an electrician.

Check to see that a breaker is not tripped due to a power surge. A switch that trips often is another warning sign.

One of the most important methods to use is preventive maintenance. Use a home safety electrical checklist. As a homeowner, you need to be sure that your home is a safe place. A good recommendation is to go through the checklist at least every 6 months. The Consumer Product Safety Commission recommends having an electrician inspect your home for electrical problems every 10 years. An excellent place to record the time of inspection is inside your electrical panel box. This allows for common electrical outlet problems to be readily identified, repaired, and/or updated.

When it comes to electrical outlet issues, troubleshooting refers to checking not repairing. This is a job for a qualified electrician!

Electricity powers our lives with comfort and convenience, but do not forget how powerful and dangerous it is. If you experience any type of electrical outlet problems, please contact a certified electrician! Contact them to assess and repair any problems. Consider it as a life-saving opportunity and a home investment. Making any type of repair or installation that puts you in contact with electricity is not a DIY project. Call Mister Sparky NWA electricians today.

Mister Sparky Electrician NWA, America’s On-Time Electrician in Bella Vista, Bentonville, Rogers, Springdale and Fayetteville services the Northwest Arkansas area with a team of licensed electricians. In addition to flickering lights, some of the electrician services provided by the company include electrical outlet/switch repair, ceiling fan installation, lighting installation, electrical wiring repair, landscape lighting installation and home electrical inspections.

  Category: Uncategorized
  Comments: Comments Off on Common Electrical Outlet Problems